Publications Ahrens


Microfluidics to Follow Spatiotemporal Dynamics at the Nucleo-Cytoplasmic Interface During Plant Root Growth
Dupouy, G.; Singh, G.; Schmidt-Speicher, L. M.; Hoffmann, E.; Baudrey, S.; Ahrens, R.; Guber, A. E.; Ryckelynck, M.; Herzog, E.; Chabouté, M.-E.; Berr, A.
2025. Methods for Plant Nucleus and Chromatin Studies – Methods and Protocols. Ed.: C. Baroux, 223–245, Springer US. doi:10.1007/978-1-0716-4228-3_13
Spearmint Targets Microtubules by (−)-Carvone
Hering, N.; Schmit, A.-C.; Herzog, E.; Corbin, L.-T.; Schmidt-Speicher, L.; Ahrens, R.; Fauconnier, M.-L.; Nick, P.
2024. Horticulture Research, 11 (7), Art.-Nr.: uhae151. doi:10.1093/hr/uhae151
Wrinkle-free bonding of thin membranes in a microfluidic bioreactor
Speicher, L. M.; Metzger, C.; Ahrens, R.; Mager, D.; Guber, A. E.; Korvink, J. G.
2023. MikroSystemTechnik Kongress 2023, 233–236, VDE Verlag
Fabrication of biomimetic antibacterial titanium surfaces by hydrothermal oxidation
Hüschelrath, L.; Kremer, L.; Falk, F.; Ahrens, R.; Doll, P.
2023. Current Directions in Biomedical Engineering, 9 (1), 710 – 712. doi:10.1515/cdbme-2023-1178
Influence of the Available Surface Area and Cell Elasticity on Bacterial Adhesion Forces on Highly Ordered Silicon Nanopillars
Doll, P. W.; Doll, K.; Winkel, A.; Thelen, R.; Ahrens, R.; Stiesch, M.; Guber, A. E.
2022. ACS Omega, 7 (21), 17620–17631. doi:10.1021/acsomega.2c00356
Development of a modular microfluidic bioreactor to further research the inter-cellular communication of plant cells and pathogens
Schmidt-Speicher, L. M.; Supp, L.; Metzger, C.; Ahrens, R.; Nick, P.; Guber, A. E.
2021. MikroSystemTechnik Kongress 2021, VDE e.V., 543–547, VDE Verlag
Rapid Prototyping of Moulds for PDMS-based Microfluidic Chips
Schmidt-Speicher, L. M.; Mellert, T.; Hurtado Rivera, A. C.; Länge, K.; Ahrens, R.; Guber, A. E.
2021. Current directions in biomedical engineering, 7 (2), 255–259. doi:10.1515/cdbme-2021-2065
A modular microfluidic bioreactor to investigate plant cell–cell interactions
Finkbeiner, T.; Manz, C.; Raorane, M. L.; Metzger, C.; Schmidt-Speicher, L.; Shen, N.; Ahrens, R.; Maisch, J.; Nick, P.; Guber, A. E.
2022. Protoplasma, 259 (1), 173–186. doi:10.1007/s00709-021-01650-0
Enhancing the soft‐tissue integration of dental implant abutments - in vitro study to reveal an optimized microgroove surface design to maximize spreading and alignment of human gingival fibroblasts
Doll, P. W.; Husari, A.; Ahrens, R.; Spindler, B.; Guber, A. E.; Steinberg, T.
2021. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 109 (11), 1768–1776. doi:10.1002/jbm.b.34836
The influence of strut-connectors in coronary stents: A comparison of numerical simulations and μPIV measurements
Melzer, H.-S.; Ahrens, R.; Guber, A. E.; Dohse, J.
2020. Current directions in biomedical engineering, 6 (3), 392–295. doi:10.1515/cdbme-2020-3101
Etch-less Microfabrication of Structured TiO Implant Coatings on Bulk Titanium Grade 23 by Direct Lithographic Anodic Oxidation
Doll, P. W.; Ahrens, R.; Guber, A. E.
2021. Journal of micromechanics and microengineering, 31, Art.Nr. 35007. doi:10.1088/1361-6439/abdae6
Rotational UV-lithography using flexible chromium coated polymer masks for the fabrication of microstructured dental implant surfaces: a proof of concept
Doll, P. W.; Doll, C.; Käßer, L.; Häfner, M.; Spindler, B.; Ahrens, R.; Nahles, S.; Heiland, M.; Guber, A. E.
2020. Journal of micromechanics and microengineering, 30 (4), Art. Nr.: 045008. doi:10.1088/1361-6439/ab70c0
Initial Bacterial Adhesion Properties of Anodically Oxidized Ti₆Al₄V
Doll, P. W.; Wolf, M.; Guttmann, M.; Thelen, R.; Ahrens, R.; Spindler, B.; Guber, A. E.; Al-Ahmad, A.
2019. 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), Berlin, July 23-27, 2019. Proceedings, 6476–6480, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EMBC.2019.8857956
Numerical simulation and in vitro examination of the flow behaviour within coronary stents
Melzer, H.-S.; Ahrens, R.; Guber, A. E.; Dohse, J.
2019. Current directions in biomedical engineering, 5 (1), 541–544. doi:10.1515/cdbme-2019-0136
Fabrication of silicon nanopillar arrays by electron beam lithography and reactive ion etching for advanced bacterial adhesion studies
Doll, P. W.; Al-Ahmad, A.; Bacher, A.; Muslija, A.; Thelen, R.; Hahn, L.; Ahrens, R.; Spindler, B.; Guber, A. E.
2019. Materials Research Express, 6 (6), Art. Nr.: 065402. doi:10.1088/2053-1591/ab0a16
Ultrasonic welding for the rapid integration of fluidic connectors into microfluidic chips
Finkbeiner, T.; Soergel, H. L.; Koschitzky, M. P.; Ahrens, R.; Guber, A. E.
2019. Journal of micromechanics and microengineering, 29 (6), Article no: 065011. doi:10.1088/1361-6439/ab10d2
Fabrication of Micro Structured Dental Implant Abutments for Optimized Soft Tissue Integration
Doll, P. W.; Semperowitsch, C.; Häfner, M.; Ahrens, R.; Spindler, B.; Guber, A. E.
2018. Current directions in biomedical engineering, 4 (1), 677–680. doi:10.1515/cdbme-2018-0163
Nanostructuring of Titanium by Anodic Oxidation with Sulfuric and Hydrofluoric Acid
Doll, P. W.; Wolf, M.; Weichert, M.; Ahrens, R.; Guber, A. E.; Spindler, B.
2018. Current directions in biomedical engineering, 4 (1), 641–644. doi:10.1515/cdbme-2018-0154
Fabrication of Polymeric Microfluidic Devices with Tunable Wetting Behaviour for Biomedical Applications
Steidle, N.; Ahrens, R.; Worgull, M.; Guber, A.; Schneider, M.
2013. 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Osaka, Japan, 3rd - 7th July 2013, 6659–6662, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EMBC.2013.6611083
Integration of digital microfluidics with whispering-gallery mode sensors for label-free detection of biomolecules
Wondimu, S. F.; Ecken, S. von der; Ahrens, R.; Freude, W.; Guber, A. E.; Koos, C.
2017. Lab on a chip, 17 (10), 1740–1748. doi:10.1039/C6LC01556E
Low-cost and easy producible paper-printed digital microfluidic chips
Von Der Ecken, S.; Sánchez, D.; Teunissen, P.; Raat, H.; Ahrens, R.; Guber, A. E.
2016. 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2016; Dublin; Ireland; 9 October 2016 through 13 October 2016, 1573–1574, Chemical and Biological Microsystems Society (CBMS)
Time-resolved NMR metabolomics of plant cells based on a microfluidic chip
Maisch, J.; Kreppenhofer, K.; Büchler, S.; Merle, C.; Sobich, S.; Görling, B.; Luy, B.; Ahrens, R.; Guber, A. E.; Nick, P.
2016. Journal of plant physiology, 200, 28–34. doi:10.1016/j.jplph.2016.06.004
Localized protein immobilization on microstructured polymeric surfaces for diagnostic applications
Steidle, N. E.; Hahn, T.; Bader, C.; Ahrens, R.; Rapp, B. E.; Guber, A. E.; Länge, K.
2016. Microfluidics and nanofluidics, 20 (2), 1–11. doi:10.1007/s10404-015-1696-8
Untersuchung des endothelialen Wachstums innerhalb eines mikrofluidischen Systems zur Nachbildung physiologischer Barrieren mit integrierter Sensorik
Rajabi, T.; Ahrens, R.; Huck, V.; März, M.; Schneider, S. W.; Schroten, H.; Guber, A.
2015. MikroSystemTechnik Kongress 2015, Karlsruhe, 26.-28.Oktober 2015
Untersuchung des endothelialen Wachstums innerhalb eines mikrofluidischen Systems zur Nachbildung physiologischer Barrieren mit integrierter Sensorik
Rajabi, T.; Ahrens, R.; Huck, V.; März, M.; Schneider, S. W.; Schroten, H.; Guber, A.
2015. MikroSystemTechnik Kongress 2015, Karlsruhe, 26.-28.Oktober 2015, 58–61, VDE Verlag
Entwicklung einer Digitalen Mikrofluidik-Plattform zur Automatisierung eines TALEN Ligations-Prozesses
Ecken, S. von der; Doll, P.; Ahrens, R.; Strähle, U.; Guber, A.
2015. MikroSystemTechnik Kongress 2015, Karlsruhe, 26.-28.Oktober 2015 Proceedings auf CD-ROM Berlin : VDE-Verlag, 2015
Entwicklung einer Digitalen Mikrofluidik-Plattform zur Automatisierung eines TALEN Ligations-Prozesses
Ecken, S. von der; Doll, P.; Ahrens, R.; Strähle, U.; Guber, A.
2015. MikroSystemTechnik Kongress 2015, Karlsruhe, 26.-28.Oktober 2015
Microfluidic polycarbonate chip for long-term cell analyses
Kreppenhofer, K.; Kim, C.; Schneider, M.; Herrmann, D.; Ahrens, R.; Kashef, J.; Gradl, D.; Wedlich, D.; Guber, A.
2012. Biomedizinische Technik, 57, 418. doi:10.1515/bmt-2012-4429
Development of a novel two-channel microfluidic system for biomedical applications in cancer research
Rajabi, T.; Huck, V.; Ahrens, R.; Apfel, M. C.; Kim, S. E.; Schneider, S. W.; Guber, A. E.
2012. Biomedizinische Technik, 57 (1). doi:10.1515/bmt-2012-4029
Diffusion- and convection-based activation of Wnt/β-catenin signaling in a gradient generating microfluidic chip
Kim, C.; Kreppenhofer, K.; Kashef, J.; Gradl, D.; Herrmann, D.; Schneider, M.; Ahrens, R.; Guber, A.; Wedlich, D.
2012. Lab on a Chip - Miniaturisation for Chemistry and Biology, 12 (24), 5186–5194. doi:10.1039/c2lc40172j
Microstructuring of multiwell plates for three-dimensional cell culture applications by ultrasonic embossing
Altmann, B.; Ahrens, R.; Welle, A.; Dinglreiter, H.; Schneider, M.; Schober, A.
2012. Biomedical Microdevices, 14 (2), 291–301. doi:10.1007/s10544-011-9605-8
Development of a microfluidic chip as artificial blood capillary vessel with integrated impedance sensors for applications in cancer research
Rajabi, T.; Ahrens, R.; Fauser, J.; Huck, V.; Schneider, S. W.; Guber, A. E.
2014. 7th International Conference on Microtechnologies in Medicine and Biology (MMB 2013), Marina del Rey, Calif., April 10-12, 2013. Ed.: E. Meng, 216–217, Institute of Physics Publishing Ltd (IOP Publishing Ltd)
Development of a digital microfluidic system for automated synthesis of DNA by interactive capped assembly
Ecken, S. von der; Ahrens, R.; Ferg, M.; Herbst, K.; Strähle, U.; Guber, A.
2013. International Symposium on Synthetic Biology (SynBio 2013), Heidelberg, December 9-11, 2013
Investigation of endothelial growth using a polycarbonate based microfluidic chip as artificial blood capillary vessel with integrated impedance sensors for application in cancer research
Rajabi, T.; Huck, V.; Ahrens, R.; Bassig, C.; Fauser, J.; Schneider, S. W.; Guber, A. E.
2013. 17th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2013), Freiburg, October 27-31, 2013
Investigation of endothelial growth using a polycarbonate based microfluidic chip as artificial blood capillary vessel with integrated impedance sensors for application in cancer research
Rajabi, T.; Huck, V.; Ahrens, R.; Bassig, C.; Fauser, J.; Schneider, S. W.; Guber, A. E.
2013. 17th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2013), Freiburg, October 27-31, 2013 Proceedings on USB-Stick Chemical and Biological Microsystems Society (CBMS), 2013, 1809–1811
Micro- and nanostructured microfluidic chip for specific protein immobilization
Steidle, N.; Hahn, T.; Bader, C.; Schneider, C.; Ahrens, R.; Worgull, M.; Guber, A.
2013. 17th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2013), Freiburg, October 27-31, 2013
Micro- and nanostructured microfluidic chip for specific protein immobilization
Steidle, N.; Hahn, T.; Bader, C.; Schneider, C.; Ahrens, R.; Worgull, M.; Guber, A.
2013. 17th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2013), Freiburg, October 27-31, 2013, 128–131, Chemical and Biological Microsystems Society (CBMS)
Fabrication of polymeric microfluidic devices with tunable wetting behavior for biomedical applications
Steidle, N. E.; Schneider, M.; Ahrens, R.; Worgull, M.; Guber, A. E.
2013. Proceedings of the 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC-13), Osaka, J, July 3-7, 2013, 6659–6662, Institute of Electrical and Electronics Engineers (IEEE)
Fabrication of polymeric microfluidic devices with tunable wetting behavior for biomedical applications
Steidle, N. E.; Schneider, M.; Ahrens, R.; Worgull, M.; Guber, A. E.
2013. 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC-13), Osaka, J, July 3-7, 2013
Development of a microfluidic chip as artificial blood capillary vessel with integrated impedance sensors for applications in cancer research
Rajabi, T.; Ahrens, R.; Fauser, J.; Huck, V.; Schneider, S. W.; Guber, A. E.
2013. 7th International Conference on Microtechnologies in Medicine and Biology (MMB 2013), Marina del Rey, Calif., April 10-12, 2013
Fabrication of polymeric microfluidic devices for bioMEMS applications
Steidle, N. E.; Lepple, A.; Schneider, M.; Heilig, M.; Ahrens, R.; Worgull, M.; Guber, A. E.
2012. 28th Internat. Conf. of the Polymer Processing Society (PPS-28), Pattaya, T, December 11-15, 2012, CD-ROM, Polymer Processing Society
Fabrication of polymeric microfluidic devices for BioMEMS applications
Steidle, N.; Schneider, M.; Ahrens, R.; Worgull, M.; Guber, A.
2013. 10th International Workshop on High Aspect Ratio Micro and Nano System Technology (HARMNST 2013), Berlin, April 21-24, 2013 Book of Abstracts
Two-chamber microfluidic system used as artificial blood vessel for the investigation of the entire migration steps of metastatic intravascular cancer cells
Rajabi, T.; Huck, V.; Ahrens, R.; Apfel, M. C.; Kim, S. E.; Schneider, S. W.; Guber, A. E.
2013. 7th Students Conf.on Mechanical Engineering (STU 2013), Tehran, IR, February 19-21, 2013
Two-chamber microfluidic system used as artificial blood vessel for the investigation of the entire migration steps of metastatic intravascular cancer cells
Rajabi, T.; Huck, V.; Ahrens, R.; Apfel, M. C.; Kim, S. E.; Schneider, S. W.; Guber, A. E.
2013. 7th Students Conference on Mechanical Engineering (STU 2013), Tehran, IR, February 19-21, 2013, Paper 1183
Fabrication of polymeric microfluidic devices for bioMEMS applications
Steidle, N. E.; Lepple, A.; Schneider, M.; Heilig, M.; Ahrens, R.; Worgull, M.; Guber, A. E.
2012. 28th Internat.Conf.of the Polymer Processing Society (PPS-28), Pattaya, T, December 11-15, 2012
Development of a microfluidic system based on polycarbonate as an artifical blood capillary vessel for medical application in cancer research
Rajabi, T.; Huck, V.; Ahrens, R.; Apfel, M. C.; Kim, S. E.; Schneider, S. W.; Guber, A. E.
2012. 3rd European Conference on Microfluidics (μFlu’12), Heidelberg, December 3-5, 2012, Societe Hydrotechnique de France (SHF)
Development of a microfluidic system based on polycarbonate as an artifical blood capillary vessel for medical application in cancer research
Rajabi, T.; Huck, V.; Ahrens, R.; Apfel, M. C.; Schneider, S. W.; Guber, A. E.
2012. 3rd European Conference on Microfluidics (μFlu’12), Heidelberg, December 3-5, 2012
Microfluidic polycarbonate chip for long-term cell analyses
Kreppenhofer, K.; Kim, C.; Schneider, M.; Herrmann, D.; Ahrens, R.; Kashef, J.; Gradl, D.; Wedlich, D.; Guber, A.
2012. BMT 2012 : 46.Jahrestagung der Deutschen Gesellschaft für Biomedizinische Technik (DGBMT), Jena, 16.-19.September 2012
Development of a novel two-channel microfluidic system for biomedical applications in cancer research
Rajabi, T.; Huck, V.; Ahrens, R.; Apfel, M. C.; Kim, S. E.; Schneider, S. W.; Guber, A. E.
2012. BMT 2012 : 46.Jahrestagung der Deutschen Gesellschaft für Biomedizinische Technik (DGBMT), Jena, 16.-19.September 2012
Polycarbonate microfluidic chip for long-term cell investigations
Kreppenhofer, K.; Kim, C.; Schneider, M.; Herrmann, D.; Ahrens, R.; Kashef, J.; Gradl, D.; Wedlich, D.; Guber, A.
2012. World Congress on Medical Physics and Biomedical Engineering, Beijing, China, May 26-31, 2012. Ed.: M. Long, Springer-Verlag
Polycarbonate microfluidic chip for long-term cell investigations
Kreppenhofer, K.; Kim, C.; Schneider, M.; Herrmann, D.; Ahrens, R.; Kashef, J.; Gradl, D.; Wedlich, D.; Guber, A.
2012. World Congress on Medical Physics and Biomedical Engineering, Beijing, China, May 26-31, 2012
Polymer-based micro flow sensor for dynamical flow measurements in hydraulic systems
Ahrens, R.; Festa, M.
2010. Journal of micromechanics and microengineering, 20 (6), 064004/1–9. doi:10.1088/0960-1317/20/6/064004
Simultaneous selective activation of Wnt/β-catenin signaling transduction in a gradient generating microfluidic chip
Kim, C.; Kreppenhofer, K.; Kashef, J.; Schneider, M.; Gradl, D.; Hermmann, D.; Ahrens, R.; Guber, A.; Wedlich, D.
2011. 5th Annual Lab-on-a-Chip European Congress, Hamburg, June 30 July 1, 2011
Microstructured multiwell plates for 3D cell culture by ultrasonic embossing
Altmann, B.; Ahrens, R.; Dinglreiter, H.; Schneider, M.; Welle, A.; Schober, A.
2010. Internat.Association for Dental Research General Session, Barcelona, E, September 14-17, 2010
Polymer-based micro flow sensor for dynamical flow measurements in hydraulic systems
Ahrens, R.; Festa, M.
2009. Micromechanics Europe (MME’09) : 20th Workshop on Micromachining, Micro Mechanics and Micro Systems, Toulouse, F, September 20-22, 2009 CD-ROM Paper 134 LAAS-CNRS
Polymer-based micro flow sensor for dynamical flow measurements in hydraulic systems
Ahrens, R.; Festa, M.
2009. Micromechanics Europe (MME’09) : 20th Workshop on Micromachining, Micro Mechanics and Micro Systems, Toulouse, F, September 20-22, 2009 CD-ROM Paper 134 LAAS-CNRS
Hochintegriertes Polymer-basiertes Ventil-Sensor-System
Barth, J.; Bonamarte, M.; Grund, T.; Krevet, B.; Ahrens, R.; Kohl, M.
2009. MikroSystemTechnik Kongress 2009, Berlin, 12.-14.Oktober 2009 Proc.auf CD-ROM Paper 48 Berlin [u.a.] : VDE-Verl., 2009
Hochintegriertes Polymer-basiertes Ventil-Sensor-System
Barth, J.; Bonamarte, M.; Grund, T.; Krevet, B.; Ahrens, R.; Kohl, M.
2009. MikroSystemTechnik Kongress 2009, Berlin, 12.-14.Oktober 2009 Proc.auf CD-ROM Paper 48 Berlin [u.a.] : VDE-Verl., 2009
Dynamical flow measurements in hydraulic systems using a polymer-based micro flow sensor
Ahrens, R.; Festa, M.
2009. Eurosensors XXIII, Lausanne, CH, September 6-9, 2009
A micro flow sensor from a polymer for gases and liquids
Ahrens, R.; Schlote-Holubek, K.
2009. Journal of Micromechanics and Microengineering, 19, 074006/1–6. doi:10.1088/0960-1317/19/7/074006
Innovatives Messverfahren zum dynamischen Betriebsverhalten hydrostatischer Anlagen
Ahrens, R.
2008. Verbundprojekt HydroSens Teilvorhaben: Mikrodurchflusssensor Abschlussbericht Hannover : TIB, 2008 Publ.online
Micro flow sensor from polymer for gases and liquids
Ahrens, R.; Schlote-Holubek, K.
2008. Schnakenberg, U. [Hrsg.] Technical Digest of 19th MicroMechanics Europe Workshop (MME 2008), Aachen, September 28-30, 2008 Aachen : RWTH, Inst.f.Werkstoffe der Elektrotechnik, 2008
Micro flow sensor from polymer for gases and liquids
Ahrens, R.; Schlote-Holubek, K.
2008. Schnakenberg, U. [Hrsg.] Technical Digest of 19th MicroMechanics Europe Workshop (MME 2008), Aachen, September 28-30, 2008 Aachen : RWTH, Inst.f.Werkstoffe der Elektrotechnik, 2008, 385–88
Polymer based micro flow sensor for gases and liquids
Ahrens, R.; Schlote-Holubek, K.
2008. Eurosensors XXII, Dresden, September 7-10, 2008 Book of Abstracts S.120 Proc.on CD-ROM S.338-41 Düsseldorf : VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik, 2008
Polymer based micro flow sensor for gases and liquids
Ahrens, R.; Schlote-Holubek, K.
2008. Eurosensors XXII, Dresden, September 7-10, 2008 Book of Abstracts S.120 Proc.on CD-ROM S.338-41 Düsseldorf : VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik, 2008
Piezoelectric microvalve
Ramanamurthy, P. V. M.; Ahrens, R.; Karmalkar, S.
2007. Indian Journal of Pure and Applied Physics, 45, 278–81
Microfluidic components of polymers. Micro flow sensor for gases and liquids
Ahrens, R.; Bacher, W.
2006. Exhibition Micromachine 2006 : 17th Internat.Tradeshow for Micro/MEMS and Nanotechnologies, Tokyo, J, November 7-9, 2006
An ultrasonic welding based process for building up a new class of inert fluidic microsensors and -actuators from polymers
Truckenmüller, R.; Ahrens, R.; Cheng, Y.; Fischer, G.; Saile, V.
2006. Sensors and Actuators A, 132, 385–92. doi:10.1016/j.sna.2006.04.040
Micro ultrasonic welding: Joining of chemically inert polymer microparts for single material fluidic components and systems
Truckenmüller, R.; Cheng, Y.; Ahrens, R.; Bahrs, H.; Fischer, G.; Lehmann, J.
2006. Microsystem Technologies, 12, 1027–29. doi:10.1007/s00542-006-0136-9
Micro ultrasonic welding. Joining of inert polymer microparts for single material fluidic devices
Truckenmüller, R.; Ahrens, R.; Bahrs, H.; Cheng, Y.; Fischer, G.; Lehmann, J.; Saile, V.
2005. Micro System Technology 2005, München, October 5-6, 2005
An ultrasonic welding based process for building up single-material, inert fluidic microsensors and -actuators from polymers
Truckenmüller, R.; Ahrens, R.; Cheng, Y.; Fischer, G.; Lehmann, J.; Wolff, K.
2005. Eurosensors XIX, Barcelona, E, September 11-14, 2005 Proc. Vol.1 MB14 Barcelona : Universitat de Barcelona, 2005
An ultrasonic welding based process for building up single-material, inert fluidic microsensors and -actuators from polymers
Truckenmüller, R.; Ahrens, R.; Cheng, Y.; Fischer, G.; Lehmann, J.; Wolff, K.
2005. Eurosensors XIX, Barcelona, E, September 11-14, 2005 Proc. Vol.1 MB14 Barcelona : Universitat de Barcelona, 2005
Entwicklung und Herstellung einer chemisch inerten Mikropumpe. PhD dissertation
Cheng, Y.; Truckenmüller, R.; Ahrens, R.; Rogge, T.
2005. Universität Karlsruhe (TH). doi:10.5445/IR/1000003442
Micro ultrasonic welding. Joining of chemically inert, high temperature polymer microparts for single material fluidic components and systems
Truckenmüller, R.; Ahrens, R.; Bahrs, H.; Cheng, Y.; Fischer, G.; Lehmann, J.
2005. Courtois, B. [Hrsg.] DTIP 2005 : Design, Test, Integration and Packaging of MEMS/MOEMS ; Proc.of the Symp., Montreux, CH, June 1-3, 2005 Grenoble : TIMA Labs., 2005
Micro ultrasonic welding. Joining of chemically inert, high temperature polymer microparts for single material fluidic components and systems
Truckenmüller, R.; Ahrens, R.; Bahrs, H.; Cheng, Y.; Fischer, G.; Lehmann, J.
2005. Courtois, B. [Hrsg.] DTIP 2005 : Design, Test, Integration and Packaging of MEMS/MOEMS ; Proc.of the Symp., Montreux, CH, June 1-3, 2005 Grenoble : TIMA Labs., 2005, 283–85
AMANDA-Flusssensor für Mikrodosieranwendungen
Ahrens, R.; Dittmann, D.; Rummler, Z.; Schomburg, W. K.; Schlote-Holubek, K.
2004. 5.Statuskolloquium des Programms Mikrosystemtechnik, Karlsruhe, 10.-11.Februar 2004 Wissenschaftliche Berichte, FZKA-6990 (Januar 2004) (Poster), 237–38
AMANDA-Flusssensor für Mikrodosieranwendungen
Ahrens, R.; Dittmann, D.; Rummler, Z.; Schomburg, W. K.; Schlote-Holubek, K.
2004. 5.Statuskolloquium des Programms Mikrosystemtechnik, Karlsruhe, 10.-11.Februar 2004 Wissenschaftliche Berichte, FZKA-6990 (Januar 2004) (Poster)
Flow-sensor from polymer fabricated with the AMANDA-process
Ahrens, R.; Dittmann, D.; Rummler, Z.; Schlote-Holubek, K.; Schomburg, W. K.; Shao, P.
2003. Reichl, H. [Hrsg.] MICRO SYSTEM Technologies 2003 : Internat.Conf.and Exhibition on Micro Electro, Opto, Mechanical Systems and Components, München, October 7-8, 2003 Poing : Franzis Verl., 2003 Incl.CD-ROM
Flow-sensor from polymer fabricated with the AMANDA-process
Ahrens, R.; Dittmann, D.; Rummler, Z.; Schlote-Holubek, K.; Schomburg, W. K.; Shao, P.
2003. Reichl, H. [Hrsg.] MICRO SYSTEM Technologies 2003 : Internat.Conf.and Exhibition on Micro Electro, Opto, Mechanical Systems and Components, München, October 7-8, 2003 Poing : Franzis Verl., 2003 Incl.CD-ROM, 312–19
Optimization of chamber adhesive bonding for packaging of micro components
Fu, C.; Koller, T.; Ahrens, R.; Rummler, Z.; Schomburg, W. K.
2002. EUROSENSORS XVI, Praha, CZ, September 15-18, 2002 Book of Abstracts (MP6)
Optimization of chamber adhesive bonding for packaging of micro components
Fu, C.; Koller, T.; Ahrens, R.; Rummler, Z.; Schomburg, W. K.
2002. EUROSENSORS XVI, Praha, CZ, September 15-18, 2002 Book of Abstracts (MP6)
Low-cost flow transducer fabricated with the AMANDA-process
Dittmann, D.; Ahrens, R.; Rummler, Z.; Schlote-Holubek, K.; Schomburg, W. K.
2001. Transducers ’01 : The 11th Internat.Conf.on Solid-State Sensors and Actuators, München, June 10-14, 2001
Polymer fluidic microstructures manufactured by thermoforming and welding
Truckenmüller, R.; Ahrens, R.; Biedermann, H.; Heckele, M.; Rummler, Z.; Schomburg, W. K.
2001. Transducers ’01 : The 11th Internat.Conf.on Solid-State Sensors and Actuators, München, June 10-14, 2001
AMANDA - kostengünstige mikrofluidische Komponenten durch Mikroabformung und Membranübertragung
Ahrens, R.
2000. Hannover Messe 2000, Produktmarkt Mikrosystemtechnik der IVAM NRW, Hannover, 24.März 2000
Einfluss der Luftfeuchtigkeit und anderer Umgebungsparameter auf AMANDA-Komponenten für die Mikrofluidik
Ahrens, R.; Rummler, Z.; Schomburg, W. K.; Stingl, C.; Wulff, K.
2000. 4.Statuskolloquium des Programms Mikrosystemtechnik, Karlsruhe, 30.-31.März 2000 Wissenschaftliche Berichte, FZKA-6423 (März 2000), 227–30
Einfluss der Luftfeuchtigkeit und anderer Umgebungsparameter auf AMANDA-Komponenten für die Mikrofluidik
Ahrens, R.; Rummler, Z.; Schomburg, W. K.; Stingl, C.; Wulff, K.
2000. 4.Statuskolloquium des Programms Mikrosystemtechnik, Karlsruhe, 30.-31.März 2000 Wissenschaftliche Berichte, FZKA-6423 (März 2000)
AMANDA - Die Kombination mit Mikroabformung eröffnet der Oberflächentechnik neue Märkte
Schomburg, W. K.; Ahrens, R.; Bacher, W.; Rummler, Z.; Saile, V.
1999. Galvanotechnik, 90, 2832–37
Microfluidic sensors and actuators from polymers fabricated by the AMANDA process
Schomburg, W. K.; Ahrens, R.; Bacher, W.; Martin, J.; Rummler, Z.; Saile, V.
1999. Transducers ’99 : The 10th Internat.Conf.on Solid-State Sensors and Actuators, Sendai, J, June 7-10, 1999
Mikromembranpumpe. Micro diaphragm pump
Ahrens, R.; Büstgens, B.; Schomburg, W. K.
1995. Karlsruhe, FZK, 1995
AMANDA-Produktion mikrofluidischer Komponenten durch Abformung und Membranübertragung
Schomburg, W. K.; Ahrens, R.; Bacher, W.; Goll, C.; Martin, J.; Rummler, Z.
1998. 3.Statuskolloquium des Projektes Mikrosystemtechnik, Karlsruhe, 2.-3.April 1998 Wissenschaftliche Berichte, FZKA-6080 (März 98)
Mikromembransensoren
Schomburg, W. K.; Vitt, M.; Börner, M. W.; Ahrens, R.
1995. 2.Statuskolloquium des Projektes Mikrosystemtechnik, Karlsruhe, 28.-29.November 1995 (Poster) Wissenschaftliche Berichte, FZKA-5670 (November 95)
AMANDA-Produktion mikrofluidischer Komponenten durch Abformung und Membranübertragung
Schomburg, W. K.; Ahrens, R.; Bacher, W.; Goll, C.; Martin, J.; Rummler, Z.
1998. 3.Statuskolloquium des Projektes Mikrosystemtechnik, Karlsruhe, 2.-3.April 1998 Wissenschaftliche Berichte, FZKA-6080 (März 98)
Long-term performance analysis of thermo-pneumatic micropump actuators
Schomburg, W. K.; Ahrens, R.; Bacher, W.; Engemann, S.; Krehl, P.; Martin, J.
1997. Transducers ’97 : 1997 Internat.Conf.on Solid-State Sensors and Actuators, Chicago, Ill., June 16-19, 1997 Digest of Technical Papers New York, N.Y. : IEEE, 1997
Long-term performance analysis of thermo-pneumatic micropump actuators
Schomburg, W. K.; Ahrens, R.; Bacher, W.; Engemann, S.; Krehl, P.; Martin, J.
1997. Transducers ’97 : 1997 Internat.Conf.on Solid-State Sensors and Actuators, Chicago, Ill., June 16-19, 1997 Digest of Technical Papers New York, N.Y. : IEEE, 1997
Polymer active microfluidic devices for μTAS
Schomburg, W. K.; Ahrens, R.; Bacher, W.; Büstgens, B.; Goll, C.; Martin, J.
1996. Proc.of the 2nd Internat.Symp.on Miniaturized Total Analysis Systems (μTAS ’96), Basel, CH, November 19-22, 1996 Analytical Methods and Instrumentation, Special Issue μTAS 1996
Mikromembransensoren
Schomburg, W. K.; Vitt, M.; Börner, M. W.; Ahrens, R.
1995. 2.Statuskolloquium des Projektes Mikrosystemtechnik, Karlsruhe, 28.-29.November 1995 (Poster) Wissenschaftliche Berichte, FZKA-5670 (November 95)
Mit dem AMANDA-Prozeß gefertigte Mikropumpen
Ahrens, R.; Bacher, W.; Hagena, O. F.; Martin, J.; Schomburg, W. K.
1998. 3.Statuskolloquium des PMT, Karlsruhe, 2.-3.April 1998 (Poster)
Fabrication of polymer microcomponents with the AMANDA-process
Schomburg, W. K.; Ahrens, R.; Bacher, W.; Martin, J.; Saile, V.
1998. Eurosensors XII, Southampton, GB, September 13-16, 1998
Miniaturisierte Pumpen, Ventile und Sensoren aus Kunststoff
Schomburg, W. K.; Ahrens, R.; Bacher, W.; Goll, C.; Martin, J.; Rummler, Z.
1998. 1.Internat.Fluidtechnisches Kolloquium, Aachen, 17.-18.März 1998
Influence of material properties on the performance of polymer micropumps
Ahrens, R.; Bacher, W.; Martin, J.; Rummler, Z.; Schomburg, W. K.
1997. Micro Materials ’97, Berlin, April 16-18, 1997
Micromembrane pump
Schomburg, W. K.; Ahrens, R.; Büstgens, B.
1996. Actuator ’96, Bremen, June 26-28, 1996
Mikromembransensoren
Vitt, M.; Ahrens, R.; Schomburg, W. K.
1995. INTERKAMA, Düsseldorf, 30.Oktober - 4.November 1995
Long-term performance analysis of thermo-pneumatic micropump actuators
Schomburg, W. K.; Ahrens, R.; Bacher, W.; Engemann, S.; Krehl, P.; Martin, J.
1997. Transducers ’97 : 1997 Internat.Conf.on Solid-State Sensors and Actuators, Chicago, Ill., June 16-19, 1997 Digest of Technical Papers New York, N.Y. : IEEE, 1997, 365–68
Long-term performance analysis of thermo-pneumatic micropump actuators
Schomburg, W. K.; Ahrens, R.; Bacher, W.; Engemann, S.; Krehl, P.; Martin, J.
1997. Transducers ’97 : 1997 Internat.Conf.on Solid-State Sensors and Actuators, Chicago, Ill., June 16-19, 1997 Digest of Technical Papers New York, N.Y. : IEEE, 1997, 365–68
Polymer active microfluidic devices for μTAS
Schomburg, W. K.; Ahrens, R.; Bacher, W.; Büstgens, B.; Goll, C.; Martin, J.
1996. Proc.of the 2nd Internat.Symp.on Miniaturized Total Analysis Systems (μTAS ’96), Basel, CH, November 19-22, 1996 Analytical Methods and Instrumentation, Special Issue μTAS 1996, 241–42
Micromembrane pump
Schomburg, W. K.; Ahrens, R.; Büstgens, B.
1997. LIGA news, (1996), (4), 14–15